Archives for Drew McKissick

Tips for Running Meetings

You can’t really have much of a political organization without meetings, which means that you need to make sure that the kind of meetings that you have serve the needs and purposes of your group or campaign.

But when it comes to typical “meetings”, (whether official group meetings, or project meetings), take time to do the things to make them more useful, (and not boring or a waste of time).

Here are some good tips for running meetings:

Have the Right Leader

Without having the right person to “run” a meeting, things can get off the rails pretty quickly and stay there. You need someone who can politely (but firmly) facilitate discussion to make things productive, and yet still keep it moving along. It’s not a job for just anybody who wants to “run” things.

Start on Time

Starting on time sets a professional tone and it’s respectful of those who show up on time. Meetings that are always starting late (because you’re late, or others are late), just encourages bad habits, and everyone will get used to never starting on time. And starting late usually means “finishing late”.

Have an Agenda

An agenda is the “plan” for the meeting, and you gotta’ have a plan. Make sure that there is an agenda, and that everyone has a copy – and that you follow it! Otherwise things will probably get off track, or you’ll spend too much time on one thing and not get everything done. Know what action items need to be resolved, (who, what, when, where). Repeat them to the group for clarification. Otherwise, you’re just meeting to meet, and what’s the point of that?

Don’t Over-stuff it

Don’t be so ambitious with how much goes into an agenda that it never gets done, or the meetings always run long and frustrate people. Remember, people like to talk, and most items usually take longer to cover than you may think. Make sure that you have enough time to do the things that need to get done.

Have Ground Rules

The most useful meetings are those where everyone participates but things stay focused, which is rare. Having some general ground rules that everyone agrees on can make things more productive. Things like: how much time you’ll spend talking about any issue; what subjects should comments be limited to; what’s off limits; and is what’s said supposed to be confidential? Try to get everyone to agree to whatever ground rules work for your group. You could even print them on the top of the agenda to keep them fresh in everyone’s mind.

Facilitate, Don’t Dictate

Part of the job of running a meeting is making sure that you involve and get good feedback from the people that are there. Otherwise you’re wasting an opportunity to get everyone’s collective minds focused on the job at hand. And how else can you know if people are getting what they want from the meetings or the group? Nobody has the market cornered on good ideas. Take advantage of the chance to do some brainstorming – just don’t let it drag on too long.

Review Action-items

It’s not very productive to meet and then have the people who are there not really know what was decided or what’s expected of them after the fact. Summarize and review what was decided and note any action items, (who, what, when, where).

End on Time

Ending on time goes hand in hand with starting on time. People have other things to do and plan their lives around, so respect their plans. If you think that a meeting will need to go long, let people know ahead of time. Just remember, “long” usually means “boring”. And boring kills!

Follow Up

Be sure to follow-up with people who need to be followed up on. Don’t let things go undone between meetings, or you miss one of the main points of having a meeting to begin with.

***
Remember, volunteers are at a premium.  If you’re going to take the time to meet, then you should take the time to get the most out of it.  Keep these tips in mind and meetings will be more productive – and the group will appreciate it.

The Five Types of Elected Officials

elected officialsIf you’ve been paying attention to politics for any length of time you’ve probably noticed that there are several different types of elected officials. Not just in terms of partisanship or ideology, but in the sense of how active or vocal they are.

If you’ve ever done any lobbying, you’ve noticed a difference in how reliable they are in terms of their vote and how hard you have to work to nail them down.

Here’s a shorthand way to categorize elected officials:

Hopeless:

These are the guys (and gals) that are so far on the other side of the street that you can forget about wasting the time even thinking about getting them on board with anything you support. Pretty much all liberals will fit into this category.

High Maintenance:

These are officials you have to constantly watch and check in with on virtually every issue. Whether it’s because they are constantly trying to make everyone happy, have their fingers in the wind, or are just more concerned about themselves, you end up spending a lot of time chasing them and bringing pressure on them to make sure they vote right when the time comes. And even then sometimes you come up short.

Low Maintenance:

They’re not completely reliable, but it doesn’t take as much time or pressure to bring them around. But the point is that they still require some time and effort.

No Maintenance:

Just like the label implies, you never have to question what they will do and you can always count on them to vote right, whether they get pressured or not. They’re “on the team”, and you don’t have to waste time on them, freeing you up to focus on the first two groups.

Team Leaders:

Not only are they “No Maintenance”, but they will actively help move ideas, drive debate and publicly advance the cause.  Whether it’s the public speakers or the behind-the-scenes legislative “mechanics”, they’re the true leaders of the conservative movement in government at all levels.

Knowing what type of category elected officials usually fit into can help when it comes to doing any type of grassroots lobbying, as it gives you an idea of who you have to work on, who you can count on no matter what, and who will help you advance your agenda.

If you’re actually engaged in any sort of grassroots lobbying on any issue, take some time to take inventory of the elected officials you have to deal with and categorize them accordingly so you’ll know where to spend your time, energy and resources.

Now, quick quiz: which one of these five types of elected officials do we need more of?

The more conservatives who actually get involved and “do something”, the more maintenance we can do on the elected officials who need it – and the more people we can elect who will actually help advance the cause.

 

Know Your Environment

Before you can put together a good plan for any type of campaign, you have to have good information. That means that you need an honest evaluation of the things that will have an impact on the campaign and its ability to succeed. In other words, you need to know your environment. It’s like the water that you’re going to have to swim in.

In political campaigns, knowing your environment means knowing any outside influences, knowing the campaigns and/or candidates themselves, knowing the issues and the media that you may have to deal with. If you’re aware of what the environment will be like, then you’ll know what your plan needs to address and what you need to plan around – or even try to leverage to your advantage.

Here’s how to break it down:

Know the Outside Influences:

Whether you like it or not there are some outside factors that aren’t related to you or the opposition that can have an impact on any campaign. You need to take them into account and determine what kind of difference they could make.

Below is a short list of items to consider, but make note of anything else that could have a major impact.

• If it’s an election, what other races are on the ballot? President, governor, senator, representative? State and/or local races? Are any of them popular (or unpopular) enough to impact voter turnout?
• Are candidates in other races likely to draw more favorable or unfavorable voters to the polls?
• Major endorsements? (Who’s supported by the big names, and will it matter?)
• Are there any key referendums on the ballot?
• If it’s a lobbying campaign, who supports and opposes it? Establishment/insiders or outsiders?
• Are there any special interest groups or coalitions at work? Will they help or hurt?
• Who can you expect to work against you? If it’s an election, how is all of this likely to impact voter turnout?
• What are the economic conditions? What impact will they have?
• Is there an intense anti-establishment atmosphere?
• List any key events or dates between now and the election (or any key vote that you may be lobbying) and how they could impact the campaign.

The more that you know about the outside factors that you can’t control, and the events that are looming on the horizon, the better the chances that a campaign plan will be realistic about what you can and can’t do. The point is to try to avoid creating a plan that runs smack into reality or events that you could have anticipated.

It will help you avoid having a plan that forces you to swim against the tide – or at least give you a realistic idea of just how hard you’re going to have to swim!

Know the Campaigns:

The next step is to take a realistic look at the campaign itself, as well as the opposition. What are the strengths and weaknesses? Does it have what it needs? Is it likely to? Sketch out an honest profile of both sides. Start with a simple “T” chart for strengths on one side and weaknesses on the other. Pull this basic information together and review it.

Take a good look at the opposition as well as your own campaign from several different perspectives, then specifically focus on doing more detailed research of the opposition.

Candidate profiles would include:
• Biography / Resume – (On paper, who looks more qualified and has the best story to tell?)
• Personal strengths and weaknesses – (Of candidates and campaign leadership)
• Stands on the Issues – (If it’s a candidate campaign, any flip-flops or philosophical problems?)
• Support from special interests – (Which political groups are involved for whom, and does it hurt or help?)
• Political experience – (Does anyone have any? Past campaigns? Does anyone have experienced or “smart” help?)
• Financial support – (What kind of donors? Self-funding? Access to donors?)
• Resources – (Does either campaign have what it needs to win, or is it likely to?)
• News clippings – (Collect any useful news clips / articles on the issue or candidates)
• Existing networks – (Who’s well connected and has access to others to build support)

Opposition Research: most of the information below can usually be found with the government body they represent.
• Votes and/or stands on issues: are they consistent?
• Accomplishments – (What have they sponsored or co-sponsored? Have any of their proposals become law?)
• Attendance records – (Did they show up for work regularly or not?)
• Campaign and personnel finance disclosures – (Look for any position switches within days of getting major contributions)
• Any resume inflation?

What jumps out as an obvious weakness that the public would care about? Why is that? Know the answers and you will be able to plan to exploit and leverage your strengths and the opposition’s weaknesses. You’ll know what “ground” you would rather fight on.

Sun Tzu put it this way, “If you know the enemy and know yourself, you need not fear the results of a hundred battles”. Don’t’ lose on account of ignorance.

Know the Issues:

Whether you’re running a grassroots organization, a lobbying campaign or an election campaign, issues matter. As legendary South Carolina political consultant Lee Atwater used to say “Issues win campaigns”, and he was exactly right. Issues win campaigns because campaigns are about people…and people are moved by issues.

Issues can be used to unite voters behind a cause or a candidate, or divide them away from one. They can also be used to compliment a candidate or group’s image, if they’re consistent with the current image, or what you want to portray.

Choose the Right Issues. Most people hate politics. They don’t usually get involved in it because they’re bored and lying around with nothing to do. Something motivates them. They care about something. Take the time to find out what that is.

Find the issues that are relevant to the people whose support you need – AND that are important enough to move them to take action. The kind of issues that not only motivate people, but that sometimes may even divide your supporters passionately from your opponents.

In many cases it can even work to your advantage to make an election, a vote that you may be lobbying, or even a PR campaign, into a “referendum” on a specific issue or group of issues. In other words, you can piggy-back on public support for an issue that people care about by equating support for your cause or campaign with support for that issue.

Take a look at the issue environment and determine which issues will have the greatest impact on your campaign, (or could if they caught fire).

You can check any recent polls that have been done that mention specific issues, make note of those that get a lot of play in “letters-to-the-editor”, consider doing a “focus group” of campaign supporters and reviewing major issues with them, or even send a web-based “issues survey” or poll to everyone on your email lists.

• List the “hottest” issues?
• List issues that have the potential to be “hot”?
• List those that are relevant to the supporters that you need

Remember that in order for an issue to have an impact, people must be aware of it – AND the differences between you and the opposition. They have to be highlighted aggressively and repeatedly.

Know the Media:

Communications are a critical part of any type of political campaign and, like it or not, that usually means dealing with the media, (both the “old” and “new” varieties). In order to do that effectively you need to gather some basic information about who you will be dealing with.

List all media outlets that would conceivably cover your campaign or issue: ex. radio, TV, newspapers, blogs and other notable outlets. List key contact information, political ad rates, deadlines and endorsement policies
Determine which outlets will be most relevant to the campaign and how to use them. (Ex., blogs, Facebook, Twitter, Supporter social media accounts, etc.)
ID and create a list of key social media contacts (ex., media, bloggers, key “influentials”). Communicate and share campaign updates with them on a regular basis

***

Follow these steps and make sure you have a realistic view of the environment the campaign will take place in – and be prepared to deal with it (or even leverage it)!